DVR-7004/7008/7016

DVR Network Setting

#7004/7008/7016


Before setting the networking function, make sure u have a Router and a CAT5E cable to connect the DVR and the Router.

  1. Connect the DVR and the Router. Make sure the Router works well.
  2. Right click the screen of DVR. Click the “Menu” to enter the Menu window.
  3. Select the “Networking”. Click IP ALLOCATION to set it from to DHPS /DDNS.
  4. Now memorize or write down to the paper the IP ADDRESS, DVR port number (the default is 6802) and the IE port number (the default is 80).
  5. Turn on any computer within the same network of the DVR. Visit the IP address of your Router. Making port forwarding, make the DVR port number (6802) and the IE port number (80) forward to IP ADDRESS of the DVR.
  • This step is critical.
  • We are not able to know the IP address of your Router, and we cannot specify how to do port forwarding on your computer because that is not within our service and it is very complex.
  • Different Routers have different ways to make port forwarding. So you need to ask your technician about the IP address of your Router.
  • And read the Instruction of your Router or phone your Internet Carrier to get to know how to do Port Forwarding through visiting your Router on your computer.
  1. When finished port forwarding, open the IE (Internet Explorer) on any computers. Visit the public IP address of your company.
  • If you have no idea on what your public IP address is, just Goggled or Bing “My IP” on the computer within the same network of your DVR. Then click the first result, you will see it.
  • On the other hand, if your computer runs Windows 7 or    Windows Vista. Don’t use the IE. Just open the software on the mini disc within the package of the DVR.

You will be asked to allow the computer to run an ActiveX by the IE. Just allow it. If there is nothing happened. Go to the Internet Options of your IE. Select Security and click” Custom Level…”. Find two options:

  1. Download unsigned ActiveX controls. Set it into Prompt
  2. Initialize and script ActiveX controls not marked as safe for scripting. Set it into Enable.
  3. After an ActiveX is installed on your computer, a dark blue window appears.
    1. For the Server, enter the IP address of your public IP and a “:”, followed which you need to input 6802. E.g.: “192.168.1.126:6802”
    2. For the USER, enter the user name ADMIN0 or USER01.
    3. For the password, enter ”000000” or “111111”

And then, you will get the picture on your computer.

  1. Leave a comment

Leave a comment